General Spectrometer Accessories
Glass Expansion Platinum Sampler Cone for PerkinElmer NexION 300/350/1000/1100/2000/2200/5000 ICP-MS (W1033614)
Platinum Sampler Cone (W1033614) ¿ For PerkinElmer NexION 1000/2000/5000/300/350 ICP-MS. Suitable for most applications, including corrosive samples (e.g., routine aqueous environmental samples, >5% acid matrix, HF, organic). Replace Sampler Cone Gasket each time the cone is installed, even if it is the same cone (501907691). Use 10x Magnifier Inspection Tool with Built-In LED Illumination (NC2042261) to inspect cone orifice condition. When not in use, keep cones stored in original packaging for protection. Use Sampler ConeGuard to protect cone threads during cleaning, 70-803-1024.For most common applications (e.g., routine aqueous samples, <5% acid matrix, non-HF, non-organic) we recommend Nickel Sampler Cones, see catalog number 501907684. For lowest boron background, we recommend Boron-Free Platinum Sampler Cones, see catalog number 501907687.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion RF Coil Installation Tool for Varian Series 2 Radial, Suitable for: Liberty Series 2 and Vista.
RF Coil Installation Tool for Agilent (Varian) Liberty Series 2 and Vista Radial ICP-OES. This tool is for use with all Glass Expansion’s replacement RF Coils for Agilent (Varian) Liberty Series 2 and Vista Radial ICP-OES, P/Ns 501907312, 501907313 and 501907314. To install your RF coil and ensure proper alignment, we highly recommend using our re-useable RF Coil Installation Tool Kit.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion OpalMist DC Nebulizer 0.2mL/min, Includes NFT-16-50 UniFit Connector with 0.50mm ID x 1.6mm OD x 700mm long tubing (1 piece), and 70-803-1311 Gas Fitting with Ratchet Nebulizer connector
OpalMist DC Nebulizer 0.2mL/min, includes UniFit Connector with 0.50mm ID x 1.6mm OD x 700mm long tubing (1 pc) & DC Gas Fitting Type 41 with ratchet connector (1 pc). Compatible with Shimadzu 2030 ICP-MS.Optimum nebulizer gas flow rate is 0.7L/min & sample flow rate is 0.2min. Recommended not to exceed optimum 0.2mL/min sample flow rate; however, lower gas & sample flow rates are OK. The backpressure should read ~40 psi at 0.7L/min gas flow rate. OpalMist is made from high purity PFA resulting in the lowest background & exceptional resistance to HF. Tolerates up to 15% TDS & 75um particulates.Replacement parts include P/Ns 502702959 & 501907301.Recommended nebulizer maintenance tools are Fluka RBS25 (P/N NC9000117) & Eluo Nebulizer Cleaning Tool (P/N 501907353). When nebulizer is not in use, best to store in the provided hard plastic case.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Quartz Connector with 45deg Dilution Port for Agilent 7700/7800/7900/8800/8900
Quartz Connector with 45deg Dilution Port for Agilent 7700/7800/7900/8800/8900. Compatible with Agilent 7700/7800/7900/8800/8900 ICP-MS.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Quartz Tube Set for 5100 RV Demountable Torch
Semi Demountable Torch (SDT) Body, no injector. Compatible with Agilent 5100 RV ICP-OES.Semi-demountable quartz torch body suitable for routine aqueous and organic applications but not inert to samples containing hydrofluoric acid (HF). Optional injectors include 1.8 mm Tapered Quartz Injector (501907232) for most routine aqueous and organic applications. The 2.4 mm Tapered Quartz Injector (31-808-3584) for most high dissolved solids applications, 1.8 mm Tapered Alumina Injector (501907235) for routine aqueous with HF, and the 2.4 mm Tapered Alumina Injector (501907251) for HF and high dissolved solids applications. For volatile organic solvent applications the 0.8 mm Tapered Quartz Injector (31-808-3738). The 1.4 mm Tapered Quartz Injector (31-808-3583) for less volatile organic solvents, 1.5 mm Tapered Alumina Injector (31-808-3727) for use with aqueous, including HF, and organic solvent-based matrices.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion 0
Solva Flex Pump Tube 2tag, 140mm spacing, 0.64mm ID Orange/White (PKT 12).Tag Colors: Orange/WhiteID mm: 0.64Wall Thickness mm: 0.91OD mm: 2.46Overall Length: 455mm (140mm spacing between tags)Number of Tubes Per Pack: 12Physical Properties: Thermoplastic, PVC based material with plasticizerMaterial: Made from Tygon 4040 or equivalent.Special Properties: Special tubing for hydrocarbons, petroleum products and distillates.Chemical Compatibility: Ideal for gasoline, kerosene, heating oils, cutting liquids and coolants based on glycols.Limitations: Not recommended for strong acids and alkalis, foodstuffs, beverages and medicines. Potential leaching of plasticizersGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Twister Spray Chamber with Helix CT, 50ml cyclonic, Borosilicate glass. Includes UFT-16-75 UniFit Connector (1 unit) and 70-803-1439 Helix CT locking screw with seal (1 unit)
Twister spray chamber, includes Helix CT locking screw & seal (1 pc), UniFit with 1.6mm OD x 0.75mm ID x 700mm long tube (1 pc) & 13mm ball joint clip. Made from borosilicate glass, 50mL volume. Compatible with X-Series & Element.The Twister features a baffle, which efficiently removes larger droplets, producing a smaller mean droplet size entering the plasma. Resulting in a more robust plasma, making the Twister an excellent choice for applications requiring the best possible precision & for both high TDS or organic sample matrices.The unique Helix CT interface consists of two parts, a ConstantTorque Locking Screw & chemically inert PressFit ferrule. The main feature of the Helix CT is the built-in, ratcheting torque control mechanism that allows for a consistent, zero dead volume, inert seal of the nebulizer.Replacement parts include NC1943061 & NC2081825, suggested to replace every 6 months.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Retaining Ring for D-Torch Outer Tube
Retaining Ring for D-Torch Outer Tube. Compatible with Glass Expansion’s D-Torch for Agilent (Varian) 700-ES and Vista Axial and Radial ICP-OES (30-808-2919 and 501907026, respectively), and Nu Plasma D-Torch, 501907031.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Tracey TFE Spray Chamber with Helix CT, 50ml cyclonic, PTFE.Includes UFT-16-75 UniFit Connector (1 unit) and 70-803-1439 Helix CT locking screw with seal (1 unit)
Tracey PTFE spray chamber, includes Helix CT locking screw & seal (1 pc) & UniFit with 1.6mm OD x 0.75mm ID x 700mm long tube (1 pc). Made from PTFE for HF resistance, 50mL volume. Compatible with PerkinElmer Optima 4000V, 5000V, 7000V Series ICP-OES.The Tracey PTFE is a HF-resistant cyclonic design with a proprietary Stediflow surface treatment that significantly improves sensitivity & precision, in addition to enhancing washout efficiency compared to other inert spray chamber designs. The interior surface can be refurbished at a nominal cost, average lifespan of treatment is 12 months when well cared for.The main feature of the Helix CT interface is the built-in, ratcheting torque control mechanism that allows for a consistent, zero dead volume & chemically inert seal of the nebulizer.Replacement parts include NC1943061, NC2081825 & V-044, suggested to replace every 6 months.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Alumina Injector for Axial D-Torch 2.4mm
Alumina Tapered Injector with 2.4mm ID.A 2.4mm ID alumina tapered injector suitable for use with aqueous, including HF, and organic solvent-based matrices. Compatible with Agilent ICP-OES 700-ES Series Axial, Vista Axial D-Torch (501907021).Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Tracey Spray Chamber with Helix CT, 50ml cyclonic, Borosilicate glass. Includes UFT-16-75 UniFit Connector (1 unit), and 70-803-1439 Helix CT locking screw with seal (1 unit).
Tracey spray chamber, includes Helix CT locking screw & seal (1 pc) & UniFit with 1.6mm (1/16") OD x 0.75mm ID x 700mm long tube (1 pc). Made from borosilicate glass, 50mL volume. Compatible with PE ELAN 5000/6000/9000 & Optima 3X00 XL/DV.The Tracey is a cyclonic design providing the highest sensitivity and fastest washout performance for ICP analyses. Ideal choice for most ICP applications, especially for those requiring the highest sample throughput and performance.The unique Helix CT interface consists of two parts, a ConstantTorque Locking Screw & chemically inert PressFit ferrule. The main feature of the Helix CT is the built-in, ratcheting torque control mechanism that allows for a consistent, zero dead volume, inert seal of the nebulizer.Replacement parts include NC1943061 & NC2081825, suggested to replace every 6 months.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Perkin Elmer US LLC IsoMist Cyclonic Spray Chamber Inlet System Kit for NexION 300/350
The IsoMist Programmable Temperature Spray Chamber lets you select any temperature between -10 °C and +60 °C in 1 °C increments to provide the optimum conditions for any application. The rapid response of the Peltier device allows a spray chamber temperature of -5 °C to be reached within 15 minutes. The spray chamber temperature can be monitored through a temperature versus time plot on your PC screen. And, for regulatory compliance, the temperature versus time data can be saved with your results. If these features are not required, once the temperature has been programmed, the IsoMist can be run in stand-alone mode without a PC connection. Temperature range: -10 °C to +60 °C Temperature set in 1 °C increments Temperature stability: +/- 0.1 °C Cools to -5 °C within 15 minutes Wireless Bluetooth or USB connection to PC PC operating system: Windows 2000 or XP Weight: 2 kg Dimensions: 195 x 100 x 120 mm Input Voltage: 100 - 250 VAC Input Frequency: 47 - 63 Hz Maximum Current: 2 A Maximu
International Crystal NACL PLATE 25.2 X 5 MM
This item has a minimum qty of 3 per supplier requirements.
NACL Plate, 25.2mm x 5mm
Glass Expansion Quartz Outer Tube for D-Torch
Quartz Outer Tube for D-Torch. Compatible with PerkinElmer NexION 300/350 D-Torch (30-807-0540, 501906989). The D-Torch, provides a robust and high-performing alternative to both single-piece and semi-demountable quartz torches, ensuring greater robustness and a lower cost of ownership. With the D-Torch design, the analyst most often replaces only the outer tube, rather than replacing the entire torch or a quartz torch body.When not in use, clean as per recommended guidelines, and store in original box.If analyzing high salt, fusions, wear metals in oil, hydrofluoric acid (HF) or volatile organics, we recommend the ceramic outer tube P/N 501907158, which does not devitrify or crack from thermal shock, like quartz. Compared to quartz outer tubes, the ceramic alternative has an extended lifespan, significantly reducing maintenance, cleaning, and downtime caused by torch failure.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Contour Flared End Solva Flex Pump Tube 2tag, 140mm spacing, 2.54mm ID, Purple/Orange (PKT 6
Contour Flared End Solva Flex Pump Tube 2tag, 140mm spacing, 2.54mm ID Purple/Orange (PKT 6).Tag Colors: Purple/OrangeID mm: 2.54Wall Thickness mm: 0.86OD mm: 4.26Overall Length: 455mm (140mm spacing between tags)Number of Tubes Per Pack: 6Physical Properties: Thermoplastic, PVC based material with plasticizerMaterial: Made from Tygon 4040 or equivalent.Special Properties: Special tubing for hydrocarbons, petroleum products and distillates.Chemical Compatibility: Ideal for gasoline, kerosene, heating oils, cutting liquids and coolants based on glycols.Limitations: Not recommended for strong acids and alkalis, foodstuffs, beverages and medicines. Potential leaching of plasticizersGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001